No Notifications

How to Overcome Computer Out of Range

How to Overcome Computer Out of Range
Have you ever had that frustrating situation where you wanted to turn on your computer, but suddenly an "Out of Range" message appeared on the screen and only a black screen was visible? Don't worry, this article will discuss ways to solve this small but annoying problem.

What is Out of Range?

Out of Range is a message that appears on the monitor screen when hardware such as a monitor fails to display the appropriate resolution or scan frequency. The message indicates that the monitor was unable to capture enough signal from the graphics card to display the appropriate on-screen resolution. This can happen when the monitor and graphics card don't connect properly, or when the screen settings are too high for the hardware being used. An Out of Range message may appear on the computer monitor, TV, or display connected to the computer.

How to Overcome Out of Range

Here are some methods that you can use to solve the Out of Range problem on your computer:

1. Reset Monitors

When your monitor shows the message "Out of Range", you can try to reset your monitor's factory default settings. The method may vary depending on the brand and model of monitor you have, but usually there will be a button on the back of the monitor marked with a "Reset" sign, or it can also be found in the settings menu on the monitor screen.

2. Replace the VGA/HDMI/DVI Cable

The connection between the computer and the monitor can be via a VGA, HDMI or DVI cable. If any of these cables are not properly connected or damaged, it will display an "Out of Range" message. Therefore, make sure the cable you use is really well connected and functioning properly.

3. Change Refresh Rate Frequency

The refresh rate frequency is the amount of image data sent to the monitor every second. Typically, computers generate displays at 60Hz and 75Hz. If your monitor does not support the refresh rate you are using, an "Out of Range" message will appear. You can try changing the refresh rate frequency setting to a lower number to solve this problem.

4. Welcome Mode

Welcome mode or safe mode is a setup option on your computer that allows you to troubleshoot and reset settings to the correct resolution. You can boot your computer into welcome mode, then reset monitor settings to solve the "Out of Range" problem.

5. Adjust Monitor Resolution Settings

Monitor resolution is the number of pixels used to display an image on the screen. Incorrect monitor resolution settings can also cause an "Out of Range" message. Be sure to set the monitor resolution according to the capabilities of the monitor you are using. You can open the control panel on your computer and set the monitor resolution setting to the proper resolution to solve this problem.

6. Adjust Monitor Refresh Rate Settings

In addition to monitor resolution, the refresh rate or screen refresh rate also affects the quality of the display displayed on the screen. The refresh rate is related to the number of times the image generated by the GPU is sent to the screen per second. If the refresh rate setting you are using does not match the monitor's capabilities, the "Out of Range" message will appear. You can try adjusting the refresh rate settings on the computer's control panel to fix this.

7. Update Monitor Drivers

A monitor driver is software that helps the computer recognize the monitor you are using. If the drivers are out of date or one of the components is not installed properly, the monitor will not function properly. Therefore, make sure the monitor driver has been downloaded and installed correctly. You can check on the official website of the monitor vendor to update the monitor driver.

8. Monitor test on another computer

After making sure the monitor has the right drivers and the correct settings, you can try the monitor test on another computer to determine whether the problem is with the monitor or not. If the monitor works fine on other computers, then there is a possibility that the problem lies with your computer's drivers or settings.

9. Test the Graphics Cable Connection

As with the VGA/HDMI/DVI cable, the graphics cable also needs to be checked for its connection and condition. A graphics cable connected to the graphics card on the CPU is a bridge between the CPU and the monitor. If one of these cables is not connected properly or is dry, it will cause an "Out of Range" message and poor display.

10. Change Graphics Port

Often computers have more than one graphics port, such as VGA, HDMI, or DVI. If the graphics port you are using is problematic, you can try using a different graphics port as an alternative to sending signals to the monitor. Try changing the graphics port on the CPU until this problem is resolved.

11. Hardware Condition Test

Problems with the computer hardware, such as the graphics card or RAM, can cause the "Out of Range" message to appear. Make sure the computer hardware is in good condition and functioning properly. You can try a hardware test through a diagnostic program or call a technician to help check hardware conditions.

12. Set Game or Application Settings

Some games or applications may have resolution or refresh rate settings that are higher than the capabilities of the monitor being used. This may cause an "Out of Range" message to appear on the monitor screen. Make sure to set game or application settings according to the resolution and refresh rate of the monitor used.

13. Another Monitor Test

If the message "Out of Range" appears while using your computer or laptop, try using another monitor to test whether the problem is with your computer or laptop. If the same screen appears, there is a possibility that the problem lies with the graphics card on the computer or laptop. A computer shop or technician may be able to help with this problem.

14. Set BIOS Settings

Incorrect BIOS settings can affect hardware or software performance on the computer. When starting the computer, you can access the BIOS settings by pressing certain keys. Make sure to make the settings correctly and according to the capabilities of the computer to avoid the "Out of Range" message problem.

15. Check Registry

The registry on your computer contains configuration information about all the programs installed on your computer. Errors or damage to the registry can cause problems in the operation of the computer, including the appearance of an "Out of Range" message. You can use the registry editor to repair damage to the registry or provide backups of important data in the registry.

16. Replace Monitor Cable

The monitor cable can also be the cause of the "Out of Range" problem. There may be a problem with a damaged cable connection or a cable type that is not compatible with the monitor and the port on your computer. Try replacing your monitor cable with a healthy cable to see if that helps solve the problem.

17. Use Safe Mode

Safe mode is an operating mode on a computer that only loads basic programs and drivers to run the operating system and avoids program errors or drivers that might cause problems. You can enter safe mode to determine whether the "Out of Range" problem occurs in the operating system or not. If the problem is resolved in Safe mode then it is possible that a program or driver is causing the problem.

18. Do a Virus Scan

Viruses on your operating system can cause problems on various computer systems. Perform a virus scan on your computer to ensure that your operating system is clean and not infected with viruses.

19. Reinstall the Operating System

If all of the above methods fail to fix the "Out of Range" problem, then reinstalling the operating system might be the last resort to fix it. Make sure to have a backup of important data before starting the operating system reinstall process.

20. Consult a Technician

If you are having trouble solving the "Out of Range" problem with the above method, then it is best to consult an experienced computer technician for the best solution. A computer technician may be able to help you find the source of the problem and suggest the right solution to fix the "Out of Range" problem on your computer.


The "Out of Range" message appears on the monitor when the resolution or refresh rate set on the computer does not match the monitor's capabilities. Some common causes are incorrect resolution or refresh rate settings, graphics card drivers that are not installed or outdated, damaged monitor fog, or problematic computer hardware. There are several methods you can do to fix the "Out of Range" message on the monitor, including resetting the resolution or refresh rate, installing or updating the graphics card driver, repairing or replacing the monitor cable, and ensuring the BIOS and registry settings are in good condition. Correct. If all of these methods don't work, finally you can try to reinstall the operating system and consult with an experienced computer technician to get the best solution according to the problem at hand.
hardware tips-trik
Gabung dalam percakapan
Posting Komentar